Operating instructions

Operating instructions

Insert the product into the COMPUTER USB port and then open the USB signal generator software, the product is completely controlled by the host computer.

Software download link：

Click me to download http://doctuchuang.eirbio.cn/FY211_USB_PCSoftware_driven1.zip

Instructions for upper computer：

control output

(1) Click 1 in the figure to select the serial port corresponding to USB signal generator.
(2) Click 2 in the picture to open the serial port.
(3) Select the waveform and frequency to be output according to 3 and 4 points in the figure, or set according to the common frequency.
(4) Then click 5 in the figure to turn on the output. When the output button is in off state, the USB signal generator will turn off the waveform output.

Scan frequency output

(1) Set the frequency sweep attribute according to 6 in the figure and start the frequency sweep.

gear output function description

(1) Set the properties of each gear at position 7 in the figure.
(2) Set the number of output gears at position 8 in the figure.
(3) Start/stop frequency sweep at 9 points in the figure.

Other Functions

Re - search: click the re - search button, the host will automatically search the device, and open the search device.
Save Settings: Click the save Settings button to save the current frequency and waveform to the device. By default, the device outputs the frequency and waveform retained last time after it is turned on.
Communication log: real-time display of upper computer output waveform frequency, record the communication between the upper computer and the lower computer.
Clear button: Clears communication logs